SkyBlue Professional Ceiling Painters

Ceiling Surface Preparation

A professional ceiling surface preparation is the base of a ceiling project. SkyBlue Ceiling Painters won’t need an undercoat if your ceiling has already been painted. We are able to remove any cobwebs by brushing it down with a soft broom. It should be sanded lightly after any flaky paint is removed, holes filled, and flaky paint is removed.

The purpose of SkyBlue Ceiling Painters is to make sure the ceiling is clean if it is new and not painted. A special undercoat is unnecessary so our professional painters can paint the ceiling straight away. Despite its flat finish, it conceals small imperfections. Then, tape around the tops of the walls if we aren’t planning to paint them later.

Next step is to lay out your ladder on a firm and level surface, extending the ladder three feet above the edge of the roof. After that, our ceiling painets attach the harness to the ladder and the other side of the roof along the lip of the gutter once the ladder is securely in place. These are all preparation that SkyBlue painter will do on your ceiling.

Thoroughly mix the premium paint

After we prepare for the ceiling painting, SkyBlue Auckland painters start to mix our premium paint. To be specific, SkyBlue ceiling painters will lay out some drop sheets to protect the area where we will be working. It is possible for the paint in your ceiling paint tin to separate as soon as we open it. Then, in order to blend all of the pigments back together, our ceiling painters mix the paint thoroughly with a paint stirrer.

Use paintbrush to cut in around the ceiling

Cutting in around the ceiling with a paint brush is also an essential process. Firstly, SkyBlue painters will pour some paint into a bucket since this will make it easier than having to hold a full tin of paint when we’re up on the ladder. Our next step is to shave around the ceiling with the paint brush. As a result, it would be necessary to paint the cornices and a section of the ceiling that is close to the cornices, where the roller can’t be used. SkyBlue ceiling pianters will ensure that the entire ceiling has been cut in before moving on.

Fill the tray with paint and roll it out

Filling the tray with paint and rolling it out are useful processes for ceiling painting. Once the paint reaches the bottom of the grate, we will pour some paint into the roller tray. In the meantime, the roller should be attached to an extension pole and dipped into the paint. Consequently, once the roller has been painted evenly, we pull it up the grate two or three more times. Don’t worry, SkyBlue professional painters will not overload the roller with paint in case it drips on the floor.

Begin painting

All the preparation are done, it time for SkyBlue painters to start ceiling painting. Hoever, before that, our professional painters will still ensure that the first stroke of the roller is moving away from us. In order to achieve that, we will place it one metre from the wall. Then, we will roll out the paint in an even manner by using a W-shaped roller. Actually, our painters will continue painting until the ceiling is completely painted otherwise the paint may not be applied evenly.

Second painting

There is nothing in the world that a hot pot can’t solve. If there is, then one more meal. Just kidding… Similarily, SkyBlue painters will apply a second painting after the completion of the first painting to ensure that paint is thick enough and even. To be Specific, we will repeat the cutting in process after the first coat of paint has dried, then use a roller to apply a second coat. SkyBlue pianters will continue to use the W formation so that the paint can be evenly distributed.